Upgrading Ubiquiti PS2 to DD-WRT v24 Requirements: * Direct ethernet cable connection between PC and LiteStation * Network settings of PC: 192.168.1.254/255.255.255.0 * TFTP client on PC * LiteStation firmware file (e.g. PS2.dd-wrt.bin for LiteStation5) Flashing procedure: 1. Please ensure that the latest firmware revision of Ubiquiti is already installed using the web upgrade utility (e.g.V 2.1.9) If not, please reflash it using the Ubiquiti PS2 Web interface. This is important to ensure that the latest RedBoot Bootloader is installed. 2. power off the device and power it on again while holding the reset button for about ~10 seconds 3. flash PS2.dd-wrt.bin using tftp to 192.168.1.20 in binary mode windows : tftp -i 192.168.1.20 put PS2.dd-wrt.bin linux/unix/macosx: tftp 192.168.1.20 tftp> bin tftp> put PS2.dd-wrt.bin tftp> exit 4. after successfully flashing the unit will be accessible with web on 192.168.1.1